Training & Workshops

Nov
16
Wed
Fabtech 2016 @
Nov 16 – Nov 18 all-day
Fabtech 2016 @   | Las Vegas | Nevada | United States

We are attending Fabtech 2016 in Las Vegas, NV
November 16-18, 2016 | Las Vegas Convention Center | Las Vegas, NV

FABTECH heads to Las Vegas, NV on November 16-18, 2016 bringing together an anticipated 27,000 attendees and 1,400 exhibiting companies all under one roof. The show provides a backdrop for visitors to experience live equipment demonstration, find cost savings solutions, and network with industry peers throughout the 500,000+ square feet of show floor throughout the A, B, and C buildings at the Las Vegas Convention Center. The event also provides learning opportunities beyond the exhibits with over 100 educational sessions and expert-led presentations on the latest industry trends and technology in the metal forming, fabricating, welding and finishing industries.

Mar
22
Wed
Mechanical Contractors Association of Eastern Missouri @
Mar 22 all-day
Mechanical Contractors Association of Eastern Missouri @   | St. Louis | Missouri | United States

We are attending the Mechanical Contractors Association of Eastern Missouri
March 22nd, 2017 | CeeKay Supply | St Louis, MO.

More information please contact


Tim Schaaf

Cee Kay Supplies

5835 Manchester Ave, St. Louis, MO 63110

314-644-3500

 

 

Mar
23
Thu
Mini Weld Show AWS ST LOUIS SECTION @
Mar 23 all-day
Mini Weld Show AWS ST LOUIS SECTION @   | St. Louis | Missouri | United States

We are attending the American Welding Society ST LOUIS SECTION
March 23nd, 2017 | CeeKay Supply | St Louis, MO.

More information please contact


Tim Schaaf

Cee Kay Supplies

5835 Manchester Ave, St. Louis, MO 63110

314-644-3500

 

AWS_StLouis_March_2017_Mini-Weld Show_Flyer

 

 

 

May
22
Mon
Tip Tig Workshop 5/22/17 @ AIDT Maritime Training Center
May 22 @ 9:00 AM – 4:00 PM
Tip Tig Workshop 5/22/17 @ AIDT Maritime Training Center | Mobile | Alabama | United States

AIDT Maritime Training Center will be hosting an welding workshop for the new Tip-Tig GTAW welding process on May 22 located at 360 Addsco Road in Mobile Alabama.

REGISTER ONLINE NOW

What is TIP TIG…?

The TIP TIG process is a semi automatic wire feed technology which creates a vibratory effect on the wire in addition to combining Hotwire current to the filler metal prior to entering the weld puddle.

The vibratory effect is created by a linear forward & backward mechanical motion created by the custom wire feeder system

The Hotwire current is created by a secondary power source within the TIP TIG unit.

  • The Tip-Tig manual process offers numerous weld benefits and is far superior to the manual Tig process.
  • The Tip-Tig process lowers weld sensitivity and can provide superior weld quality and much higher wire feed rates compared to manual TIG.

The process has been proven on all schedules of carbon and stainless steel and tested on Inconel 625, Duplex, Super Duplex, Titanium, Nickel and Copper Alloys with great success.
This process is helping companies weld at a very high speed and with the highest quality possible manually.

Why do I need to look at TIP TIG:

  • Pipe Applications
  • Needing more production of the GTAW process.
  • Application requires 100% X Ray.
  • Trouble with finding high skilled TIG welders.
  • Having problems with distortion, spatter or quality issues.
  • Wanting to decrease hexavalent chromium exposures from FCAW.

As a part of this workshop at the Training Center would like to invite interested contractors and customers to a demonstration on May 22nd from 9:00 to 4:00 p.m.

The day will start with a presentation about the process, cost savings and ideal applications where TIP TIG fits, Q&A then lunch.

Speaker will be from Juvenal Calvo who is the Vice President of TIP TIG USA.

The afternoon will be a pipe demonstration on a 6″ sch 80 CS pipe to show the process from root to cap in position as well as stainless fillet welds on T Joints.

Agenda:

  • Opening Presentation 9:00 – 10:30
  • Q&A 10:30 – 12:00
  • Lunch 12:00 – 12:45
  • Weld Demonstration 1:00 – 4:00

Lunch will be catered by TIP TIG USA

Please come out and look at this new exciting technology. You may contact Nick Corso (TIP TIG USA) or Tony Hopper (AIDT) for more information and to RSVP.

Tony Hopper
AIDT Project Coordinator
251-405-8698 x283
thopper@aidt.edu

Nick Corso
TIP TIG USA
856-312-8166
nick@tiptigusa.com

Feb
9
Fri
Local 598 Industry Day @ 1328 N. Road 28
Feb 9 @ 12:00 PM – Feb 10 @ 2:00 PM
Local 598 Industry Day @ 1328 N. Road 28 | Pasco | Washington | United States

Come learn more about new and emerging equipment in your industry from the following vendors. Lunch will be provided on Feb. 10th
– T I P T I G U S A
– MA T H E Y D E A RMA N
– T R I T O O L
– L I N C O L N
– L I B U R D I D I AME T R I C S
– MI L L E R
– V I E G A
– SWA G E L O K
– A R C MA C H I N E S I N C 
– U P O N O R

May
30
Wed
Elimination of Backing Gas in Austenitic and Duplex Stainless Steel Welds using High Deposition Metal Transfer Gas Tungsten-Arc Welding (HDMTGTAW) @ Tip Tig USA
May 30 @ 9:00 AM – 5:00 PM
Elimination of Backing Gas in Austenitic and Duplex Stainless Steel Welds using High Deposition Metal Transfer Gas Tungsten-Arc Welding (HDMTGTAW) @ Tip Tig USA | Runnemede | New Jersey | United States

Open root welding of austenitic and duplex stainless steel with gas tungsten-arc welding (GTAW) is typically performed using an inert backing gas for purging, such as argon, to protect the root pass from atmospheric contamination and oxidation. In many cases, using a backing gas for purging is impractical due to system design, access limitations, personnel safety, schedule and various economic factors. Until recently the only options available for open root welding of austenitic and duplex stainless steel that eliminated the need for backing gas were: flux agents, flux coated/flux cored rods and gas metal-arc welding using the short-circuiting transfer (GMAW-S). Each of these options have been used successfully, to some degree, in diverse service environments.

REGISTER ONLINE NOW

Now after extensive application research, development and testing the need for backing gas has been eliminated for open root welding of austenitic and duplex stainless steel using a semiautomatic GTAW hot wire welding system technically known as High Deposition Metal Transfer Gas Tungsten-Arc Welding (HDMTGTAW), combined with stainless steel or duplex flux cored wires (AWS/ASME A/SFA-5.22 and A/SFA-5.22M) and argon shielding. The HDMTGTAW system when combined with flux cored wire for the root pass and solid wire for the remainder of the weldment is a complete, cost effective system for welding the entire weld from root to cap that is capable of producing quality welds with high integrity.

REGISTER ONLINE NOW

Presented By

Charles W. “Pat” Patrick | Scott Witkowski | Brad Berglan | Ramon Solo
Maverick Testing Laboratories, Inc.
10001 Porter Road, Suite 100
La Porte, Texas 77571

William F. Newell, Jr., PE, PEng, IWE
Euroweld, Ltd.
255 Rolling Hills Road
Mooresville, NC 28117

Juvenal Calvo
TIP TIG USA, LLC
155 E 9th Avenue
Runnemede, New Jersey 08078

 

REGISTER ONLINE NOW

May
31
Thu
Elimination of Backing Gas in Austenitic and Duplex Stainless Steel Welds using High Deposition Metal Transfer Gas Tungsten-Arc Welding (HDMTGTAW) @ Tip Tig USA
May 31 @ 9:00 AM – 5:00 PM
Elimination of Backing Gas in Austenitic and Duplex Stainless Steel Welds using High Deposition Metal Transfer Gas Tungsten-Arc Welding (HDMTGTAW) @ Tip Tig USA | Runnemede | New Jersey | United States

Open root welding of austenitic and duplex stainless steel with gas tungsten-arc welding (GTAW) is typically performed using an inert backing gas for purging, such as argon, to protect the root pass from atmospheric contamination and oxidation. In many cases, using a backing gas for purging is impractical due to system design, access limitations, personnel safety, schedule and various economic factors. Until recently the only options available for open root welding of austenitic and duplex stainless steel that eliminated the need for backing gas were: flux agents, flux coated/flux cored rods and gas metal-arc welding using the short-circuiting transfer (GMAW-S). Each of these options have been used successfully, to some degree, in diverse service environments.

REGISTER ONLINE NOW

Now after extensive application research, development and testing the need for backing gas has been eliminated for open root welding of austenitic and duplex stainless steel using a semiautomatic GTAW hot wire welding system technically known as High Deposition Metal Transfer Gas Tungsten-Arc Welding (HDMTGTAW), combined with stainless steel or duplex flux cored wires (AWS/ASME A/SFA-5.22 and A/SFA-5.22M) and argon shielding. The HDMTGTAW system when combined with flux cored wire for the root pass and solid wire for the remainder of the weldment is a complete, cost effective system for welding the entire weld from root to cap that is capable of producing quality welds with high integrity.

REGISTER ONLINE NOW

Presented By

Charles W. “Pat” Patrick | Scott Witkowski | Brad Berglan | Ramon Solo
Maverick Testing Laboratories, Inc.
10001 Porter Road, Suite 100
La Porte, Texas 77571

William F. Newell, Jr., PE, PEng, IWE
Euroweld, Ltd.
255 Rolling Hills Road
Mooresville, NC 28117

Juvenal Calvo
TIP TIG USA, LLC
155 E 9th Avenue
Runnemede, New Jersey 08078

 

REGISTER ONLINE NOW

Nov
6
Tue
Fabtech Expo @ Georgia World Congress Center
Nov 6 – Nov 8 all-day

FABTECH 2018 is November 6-8 in Atlanta

TipTig USA is exhibiting at FABTECH 2018.

FABTECH is where the industry comes together to see what’s now, what’s new and what’s next. It’s where connections are made and where deals get done. See cutting-edge exhibits, learn from expert-led education, network with peers and more, Nov. 6-8 at the Georgia World Congress Center.

Jan
28
Mon
2019 API Inspection and Mechanical Integrity Summit @ Galveston Island
Jan 28 – Jan 31 all-day
2019 API Inspection and Mechanical Integrity Summit @ Galveston Island

2019 API Inspection and Mechanical Integrity Summit  ~ January 28-31 ~ Galveston Island,Texas

Feb
19
Tue
Pipe Trades Training and Technology Conference Expo @ San Diego
Feb 19 – Feb 21 all-day
Pipe Trades Training and Technology Conference Expo @ San Diego

Pipe Trades Training and Technology Conference Expo ~ February 19 – 21, 2019 ~ San Diego, CA 

Home
Dealer Locator

Company News

Contact Us