Training & Workshops
To: All Signatory Contractors/Customers to the UA and Local 8
UA local 8 Training Center will be hosting an International Training Fund Regional Training Class for the new TIP TIG welding process on September 22th, 23th, and 24th of 2015 at the Local Union 8 Training Center. The class is a 20 hour train the trainer class for current UA welding instructors.
TIP TIG Trainers
- Justin Forni
- Dave Marland
The TIP TIG manual process offers numerous weld benefits and is far superior to the manual Tig process. The TIP TIG process lowers weld sensitivity and can provide superior weld quality and higher wire feed rates than many automated hot wire Tig welds. The process has been proven on all schedules of carbon and stainless steel and tested on inconel 625 and other alloys with great success. This process is helping the UA weld at a very high speed and the highest quality possible manually.
As a part of this class the Training Center would like to invite interested signatory contractors and customers to a demonstration on September 24th from 1:00 to 3:00 p. m. A lunch meet and greet will be hosted from 12:00 pm to 1:00 pm. The demonstrations will be given by the UA instructors and the newly trained students. Please come out and look at this new exciting technology.
Please see below for more information and to RSVP for this training event.
Local 8 Plumbers & Steamfitters Training Center
8600 Hillcrest Rd
Kansas City, MO 641387
816.363.8888
The UA will be hosting a conference to address changes in the welding industry on October 6th & 7th in Ann Arbor, Michigan.
The conference will focus on emerging welding technologies and equipment being used in the piping industry.
· How new technologies and processes affect productivity, quality and safety on projects
· Current equipment & processes in use on piping projects
· Benefits of new technology versus older processes & equipment
· Development of new materials/alloys and their effects on processes & equipment
· Looking down the road at future technologies
· Types of training offered to UA Locals & Members
Conference attendees will include end-users, manufacturers, contractors and representatives from UA local unions.
The TIP TIG Process will be talked about on where it benefits the Piping markets especially benefiting Mechanical contractors
Speaker will be Application Engineer Juvenal Calvo
Live welding demonstrations will be performed by Union TIP TIG Instructor Justin Forni
Location Facilities
The Great Lakes Regional Training Center (GLRTC) is the most recent addition to the UA training center system.
This facility is the home base for the annual United Association Instructor Training Program and will be the location for this conference.
For more information please contact
Randall A. Gandy
UA Training Specialist
UA Training Department – International Training Fund
Plant City, FL 33565
Office: (813)754-3640
Fax: (813)752-6482
To: All Signatory Contractors/Customers to the UA and Local 598
UA local 598 Training Center will be hosting an International Training Fund Regional Training Class for the new TIP TIG welding process on October 27th, 28th, and 29th of 2015 at the Local Union 598 Training Center. The class is a 20 hour train the trainer class for current UA welding instructors.
TIP TIG Trainers
- Justin Forni
- Dave Marland
The TIP TIG manual process offers numerous weld benefits and is far superior to the manual Tig process. The TIP TIG process lowers weld sensitivity and can provide superior weld quality and higher wire feed rates than many automated hot wire Tig welds. The process has been proven on all schedules of carbon and stainless steel and tested on inconel 625 and other alloys with great success. This process is helping the UA weld at a very high speed and the highest quality possible manually.
As a part of this class the Training Center would like to invite interested signatory contractors and customers to a demonstration on October 29th from 1:00 to 3:00 p. m. A lunch meet and greet will be hosted from 12:00 pm to 1:00 pm. The demonstrations will be given by the UA instructors and the newly trained students. Please come out and look at this new exciting technology.
Please see below for more information and to RSVP for this training event.
Local 598 Plumbers & Steamfitters Training Center
1328 Road 28
Pasco, WA 99301
509-545-1446
We are attending Fabtech 2015 in Chicago
Booth # N28049 in the Welding Pavilion, North Hall
FABTECH heads to Chicago, IL on November 9-12, 2015 bringing together an anticipated 27,000 attendees and 1,400 exhibiting companies all under one roof. The show provides a backdrop for visitors to experience live equipment demonstration, find cost savings solutions, and network with industry peers throughout the 500,000+ square feet of show floor throughout the A, B, and C buildings at the McCormick Place. The event also provides learning opportunities beyond the exhibits with over 100 educational sessions and expert-led presentations on the latest industry trends and technology in the metal forming, fabricating, welding and finishing industries.
February 9-11, 2016
International Agri-Center
4500 South Laspina Street
Tulare, CA 93274 [map]
World Ag Expo is the world’s largest annual agricultural exposition. More than 1,500 exhibitors display the latest in farm equipment, communications and technology on 2.6 million square feet of exhibit space. Free seminars focus on a variety of topics important to dairy producers, farmers, ranchers and agribusiness professionals. World Ag Expo is a can’t miss show for anyone in ag.
Cost
$15 General Admission
Hours
Tuesday & Wednesday, 9 a.m. to 5 p.m.
Thursday, 9 a.m. to 4 p.m.
Contact
Phone: (800) 999-9186
Fax: (559) 688-5527
Email info@farmshow.org
Check out photos from World Ag Expo
Please visit TIP TIG USA with our Partner Praxair at booth H3, H5, H7, H9
To: All Signatory Contractors/Customers to the UA and Local 663
UA local 663 Training Center will be hosting an TIP TIG welding class on February 10th, and 11th of 2016 at the Local Union 663 Training Center.
TIP TIG Trainers
- Juvenal Calvo
- Dave Marland
The TIP TIG manual process offers numerous weld benefits and is far superior to the manual Tig process. The TIP TIG process lowers weld sensitivity and can provide superior weld quality and higher wire feed rates than many automated hot wire Tig welds. The process has been proven on all schedules of carbon and stainless steel and tested on inconel 625 and other alloys with great success. This process is helping the UA weld at a very high speed and the highest quality possible manually.
As a part of this class the Training Center would like to invite interested signatory contractors and customers to a demonstration on February 10th.
A lunch meet and greet will be hosted from 12:00 pm to 1:00 pm.
Please see below for more information and to RSVP for this training event.
1151 Confederation St,
Sarnia, Ontario N7S 3Y5
To: All Signatory Contractors/Customers to the UA and Local 393
UA local 393 Training Center will be hosting an International Training Fund Regional Training Class for the new TIP TIG welding process on March 22th, 23th, and 24th of 2016 at the Local Union 393 Training Center. The class is a 20 hour train the trainer class for current UA welding instructors.
TIP TIG Trainers
- Justin Forni
- Dave Marland
The TIP TIG manual process offers numerous weld benefits and is far superior to the manual Tig process. The TIP TIG process lowers weld sensitivity and can provide superior weld quality and higher wire feed rates than many automated hot wire Tig welds. The process has been proven on all schedules of carbon and stainless steel and tested on inconel 625 and other alloys with great success. This process is helping the UA weld at a very high speed and the highest quality possible manually.
As a part of this class the Training Center would like to invite interested signatory contractors and customers to a demonstration on March 24th from 1:00 to 3:00 p. m. A lunch meet and greet will be hosted from 12:00 pm to 1:00 pm. The demonstrations will be given by the UA instructors and the newly trained students. Please come out and look at this new exciting technology.
Please see below for more information and to RSVP for this training event.
Pipe Trades Training Center
UA Local 393
740 Commercial St.
San Jose, CA
408-453-6330
To: All Signatory Contractors/Customers to the UA and Local 274
UA local 274 Training Center will be hosting an International Training Fund Regional Training Class for the new TIP TIG welding process on May 10th, 11th, and 12th of 2016 at the Local Union 274 Training Center. The class is a 20 hour train the trainer class for current UA welding instructors.
TIP TIG Trainers
- Jaritt Kagan
- Dave Marland
The TIP TIG manual process offers numerous weld benefits and is far superior to the manual Tig process. The TIP TIG process lowers weld sensitivity and can provide superior weld quality and higher wire feed rates than many automated hot wire Tig welds. The process has been proven on all schedules of carbon and stainless steel and tested on inconel 625 and other alloys with great success. This process is helping the UA weld at a very high speed and the highest quality possible manually.
As a part of this class the Training Center would like to invite interested signatory contractors and customers to a demonstration on May 10th from 1:00 to 3:00 p. m. A lunch meet and greet will be hosted from 12:00 pm to 1:00 pm. The demonstrations will be given by the UA instructors and the newly trained students. Please come out and look at this new exciting technology.
Please see below for more information and to RSVP for this training event.
Pipefitters Local Union No. 274
UA Local 274
205 Jefferson Rd.
Parsippany, NJ
201-943-4700
Welcome, UA!
The 63nd Annual Instructor Training Program will be held from Sunday, August 14 – Friday, August 19, 2016 at Washtenaw Community College. Please note that information, especially hotel availability, may change frequently. We look forward to seeing you this August!
The 14th Annual UA Block Party will be held on Monday, August 15th from 6-10 p.m. in downtown Ann Arbor on Main Street between Liberty and William Streets and Ashley and Fourth.
We will have live entertainment and the downtown restaurants will offer dining on the sidewalks and in the streets.
We will also have the 4th Annual UA 5K Run and Pub Crawl to benefit the Semper Fi Fund along with the 2nd Annual “Big Flush” Toilet races. We look forward to seeing you there!
To: All Signatory Contractors/Customers to the UA and Local 184
UA local 184 Training Center will be hosting an International Training Fund Regional Training Class for the new TIP TIG welding process on September 27th, 28th, and 29th of 2016 at the Local Union 184 Training Center. The class is a 20 hour train the trainer class for current UA welding instructors.
TIP TIG Trainers
- Randy Schnabelrauch
- Dave Marland
The TIP TIG manual process offers numerous weld benefits and is far superior to the manual Tig process. The TIP TIG process lowers weld sensitivity and can provide superior weld quality and higher wire feed rates than many automated hot wire Tig welds. The process has been proven on all schedules of carbon and stainless steel and tested on inconel 625 and other alloys with great success. This process is helping the UA weld at a very high speed and the highest quality possible manually.
As a part of this class the Training Center would like to invite interested signatory contractors and customers to a demonstration on September 29th from 1:00 to 3:00 p. m. A lunch meet and greet will be hosted from 12:00 pm to 1:00 pm. The demonstrations will be given by the UA instructors and the newly trained students. Please come out and look at this new exciting technology.
Please see below for more information and to RSVP for this training event.
Plumbers and Steamfitters Local 184
UA Local 184
5820 Benton Rd.
Paducah, KY
270-898-7381